You have 0 items in your cart.
Pressure
Category:
Pressure
Compatible with the 717 and 718 calibrators 100 PSI and below The kit contains: three translucent hoses one meter long easy to connect push fit connectors for both connect ion to the calibrator and the device under test one 1/8 to ¼ NPT female-female adapter.
Category:
Pressure
Pump can be easily cleaned without disassembly The vernier can be used as a stand-alone low pressure calibration source Two pressure ports allowing simultaneous connection ¼ -NPT female fitting for the reference gauge or pressure module ¼” NPT female fitting for the unit under test Adjustable stroke length can be set to limit the pressure per stroke Includes 1/4 in NPT male to 1/4 in BSP female 1 meter of hose (2) 1/8 in NPT male quick connects 1/8 NPT female to 1/4 in BSP female Seal Kit Instruction sheet
Category:
Pressure
Adjustable from 725 to 5800 PSI (50 to 200 bar) Preset at 2,900 psi/200 bar) Repeatability to 10% of nominal setting. Installs directly into the 700HTP-1 pump
Category:
Pressure
Pump can be easily cleaned without disassembly. Adjustable pressure relief valve with slow-bleed capability. Allows the slow release pressure at a controlled rate Quick fit connectors, one for the reference port for connection to a Fluke 700 series pressure module and one to connect to a unit under test Slim design, easy to carry and use Includes: (2) adapters to convert the reference and UUT port hose fitting to 1/4" BSP female Adapter to convert the reference port hose fitting to 1/4" NPT female for connection to 700 series pressure modules One seal kit Instruction sheet in English
Category:
Pressure
Hose and fittings to connect directly to the Fluke 700HTP-1 test pressure port Includes plugs and caps to eliminate fluid loss in hose, eliminates the need to re-prime the hose. Self-sealing fittings with easy finger tight connections. Low volumetric expansion and a negligible pressure drop at rated pressures One year warranty Includes: Hose with (2) 1/4" NPT female output connections (2) adapters that to convert ¼: NPT female to 1/4" NPT male (include sealing caps) 1/4 in NPT female to 1/4 in BSP male adapter Instruction sheet
Category:
Pressure
The Fluke 700PMP is a hand-operated pressure pump to provide pressures up to 150 psi/1000 kPa. Output fitting is 1/8 FNPT Linear stroke of 4 cm. Multi-turn venire for fine adjustment of pressure. One year warranty
Category:
Pressure
The Fluke 700PCK makes it possible to calibrate your pressure modules at your facility using your own precision pressure standards. When installed on your PC, the Windows T-based software easily steps you through an as-found verification, a calibration adjustment, and an as-left verification. Calibration data is captured for import to your database. A 386 or better PC running Windows 3.1 or better is required, along with a precision pressure standard with an uncertainty of less than 1/4 that of the pressure module being verified. The kit consists of a power supply, an interface adapter, appropriate cables, and Fluke 700PC Pressure Module Calibration Software. Warranty: One year
Category:
Pressure
Display pressure readings in any of 10 different pressure units you specify in the calibrator setup Rugged urethane molded case protects the module from rough handling and harsh conditions Features internal temperature compensation from 0°C to 50°C for full-accuracy performance Includes NIST-traceable calibration certificate Module can be calibrated locally using the Fluke 700PCK Pressure Calibration Kit, a PC, and a precision pressure source One year warranty