You have 0 items in your cart.
Fluke
Sub Categories
Category:
Split-Core Current Transformers
Current range: 0.01 – 10A Accuracy: 1% RDG +/- 0.5% FS Frequency response: 5 kHz Length: 7/16” (1 cm)
Category:
Temperature Accessories
For general purpose applications Teflon tape insulation Not suitable for liquid immersion Shipped with the 80TK, Fluke 50 Series Measurement range: -40 °C to 260 °C (-40 °F to 500 °F) Accuracy: ± 1.1 °C (2.0 °F) over the range of 0°C to 260°C (32°F to 500°F) Maximum Temperature of Insulation: 260°C (500°F)
Category:
Infrared Windows
If you have an onsite infrared program already or planning to establish one you should consider installing Fluke IR Windows. Fluke IR Windows will increase: Efficiency – cut down the time needed to conduct regular inspections Safety – increase your employees safety by not exposing them to live equipment Productivity – cuts down the number of technicians needed to conduct inspections NFPA 70E and local safety regulation compliance is easier with Fluke IR Windows Fluke IR Windows are constructed with a CLIRVU crystal. CLIRVU crystals are designed to withstand the extreme pressures and temperatures of an arc-fault event, and offer protection from molten projectiles associated with arc-flashes. CLIRVU optic materials are impervious to moisture and vibration – they are totally insoluble and guaranteed never to degrade, even when subjected to mild acids or alkalis. Fluke IR Windows are arc-resistant, outdoor certified and allow thermal, ultraviolet, visual and fusion technologies to be used.
Category:
Insulation Testers
Large display with backlight Insulation test (1587: 0.01 Mohm to 2 Gohm), (1577: 0.1 Mohm to 600 Mohm) Insulation test voltages (1587: 50 V, 100 V, 250 V, 500 V, 1000 V), (1577: 500 V, 1000 V) Live circuit detection prevents insulation test if voltage> 30 V is detected for added user protection Auto-discharge of capacitive voltage for added user protection AC/DC voltage, DC milliVolts, AC/DC milliamps, Resistance (W), Continuity Auto power off to save battery power CAT III 1000 V, CAT IV 600 V measurement category Accepts optional Fluke TPAK magnetic hanging system to free your hands for other work Rugged, utility hard case allows you to bring everything you need for the job 3-year warranty
Category:
Test Leads, Probes, Clips
Voltage Range: 0.25 to 30V rms Maximum Input Voltage: 30V rms, 200V dc AC to DC Ratio: 1:1 Ratio Accuracy (At 25 MHz and loaded with 10 M ohm) Above 0.5V: +/- 0.5 dB Below 0.5V: +/- 1.0 dB Add +/- 0.2 dB in RF fields of 1 to 3 V/m Frequency Response (Relative to 25 MHz): 100KHz to 100 MHz +/- 0.5 dB 100 MHz to 200 MHz +/- 2.0 dB 200 MHz to 500 MHz +/- 3.0 dB
Category:
Laser Distance Meters
Reduction of estimation errors, saving both time and money Instant measurement with one-button operation Easy addition and subtraction function The most advanced laser technology for distance measurement Simple one-button operation to instantly measure distance between two objects Measures up to 50 m (165 ft) with accuracy of 2 mm (0.08 in) Bright laser for easy targeting even at longer distances Quick calculation of area (square feet/meters) and volume Easy addition and subtraction function Pythagoras function indirectly measures height via two other measurements Stores up to five measurement results Battery life of 3000 measurements with automatic shut-off feature Two-line display with display hold (until next button is pressed) Carrying pouch secures to your tool belt Powered by two AAA batteries
Category:
Leak Detectors
Six UV LEDs (395 nm wavelength) detect leak detection dyes Laser pointer clearly locates center of the UV field for accuracy Three LED flashlight with 100,000 hour LED life Operating temperature 0 °C to 50 °C Four operating modes: flashlight, UV light, laser light, UV/laser light combination Convenient detachable key chain carabineer and AAA battery included
Category:
Loop Calibrators
A large display and simple, pushbutton interface for ease of use. Simultaneous mA and % readout for quick, easy interpretation of readings. mA accuracy of 0.02% Push button 25% steps for fast, easy linearity checks. Save time over traditional knob type controls. "Span Check" for fast confirmation of zero and span. Selectable slow ramp, fast ramp, and step to provide smooth outputs for valve slewing and loop functional tests. 24 volt internal loop supply, so you can power and read a transmitter at the same time without carrying a DMM. Single 9V battery that is easily changed. 0 - 20 mA or 4 - 20 mA default start up modes.