You have 0 items in your cart.
Fluke
Sub Categories
Category:
Current Clamps
Measuring Range selectable per software: 1A to 100A 5A to 500A Peak current for sinusoidal currents: 240A 1350A Intrinsic error 1% Frequency Range 45 Hz to 3.0 kHz Operating Voltage 300 V CAT IV Phase Error 0.5° Jaw Opening 45 cm length 2 m cable
Category:
Current Clamp DMM Accys
Measuring Range selectable per software: 2A to 200A 10A to 1000A Peak current for sinusoidal currents: 480A 2700A Intrinsic error 1% Frequency Range 45 Hz to 3.0 kHz Operating Voltage 600 V CAT IV Phase Error 0.5° Jaw Opening 45 cm length 2 m cable
Category:
Pressure
Pump can be easily cleaned without disassembly The vernier can be used as a stand-alone low pressure calibration source Two pressure ports allowing simultaneous connection ¼ -NPT female fitting for the reference gauge or pressure module ¼” NPT female fitting for the unit under test Adjustable stroke length can be set to limit the pressure per stroke Includes 1/4 in NPT male to 1/4 in BSP female 1 meter of hose (2) 1/8 in NPT male quick connects 1/8 NPT female to 1/4 in BSP female Seal Kit Instruction sheet
Category:
Test Leads, Probes, Clips
Alligator Clips and Adaptors For FTP-1 and FTPL-1 Fused Test Probes
Category:
Current Clamps
Measuring Range selectable per software: 2A to 200A 10A to 1000A Peak current for sinusoidal currents: 480A 2700A Intrinsic error 1% Frequency Range 45 Hz to 3.0 kHz Operating Voltage 600 V CAT IV Phase Error 0.5° Jaw Opening 45 cm length 2 m cable
Category:
Current Clamp DMM Accys
Measuring Range selectable per software: 30A to 3000A 60A to 6000A Peak current for sinusoidal currents: 10kA 19kA Intrinsic error 1% Frequency Range 45 Hz to 3.0 kHz Operating Voltage 300 V CAT IV Phase Error 0.5° Jaw Opening 45 cm length 2 m cable
Category:
Pressure
Compatible with the 717 and 718 calibrators 100 PSI and below The kit contains: three translucent hoses one meter long easy to connect push fit connectors for both connect ion to the calibrator and the device under test one 1/8 to ¼ NPT female-female adapter.
Category:
Test Leads, Probes, Clips
Single probe pierces 0.25 to 1.5 mm insulated wire Small pin allows self-healing of the insulation CAT IV 600V, CAT III 1000 V, 5 A rating. UL listed One year warranty