Features
* 100MHz Bandwidth, Dual Channel, Delayed Sweep
* Built-In 6 digits Universal Counter (GOS-6103C)
* 10 Sets Memory for Front Panel Setting Save & Recall (GOS-6103/GOS-6103C)
* Time Base Auto-range (GOS-6103/GOS-6103C)
* Cursor Readout with 7 Measurements
* Panel Setup Lock of Digital-Control Functions
* Buzzer Alarm
* LED Indicators
* TV Synchronization
Description:
The GOS-6100 Series is a 100MHz, two-channel, dual-sweep, and portable oscilloscope for general purpose use. A microprocessor-based operating system controls most of the functions of the instrument, including cursor readout and digitized panel setting. On-screen alphanumeric readout and cursor function for voltage, time, frequency and phase measurement provide extraordinary operational convenience. The advance Time Base Auto-rang function conveniently acquires waveforms at the push of button (GOS-6103/ 6103C). Ten different user defined instrument settings (GOS-6103/ 6103C) can be saved and recalled without restriction. The vertical deflection system has two input channels. Each channel has 11 basic deflection factors from 2mV to 5V per division. The horizontal deflection system provides single, dual or delayed sweeps from 0.5s to 50ns per division (delayed sweep, 50ms to 50ns per division). The trigger system provides stable triggering over the full bandwidth of the vertical deflection system. |
|
Specification:
CRT | |||||||||||||||||
Type | 6-inch rectangular type with internal graticule; 0%, 10%, 90% and 100% markers. 8 x 10 div (1 div = 1 cm) |
||||||||||||||||
Accelerating Potential | 16kV approx. (GOS-6103/GOS-6103C), 12 kV approx.(GOS-6112) | ||||||||||||||||
Illumination | Continuously adjustable (GOS-6103/GOS-6103C) | ||||||||||||||||
Z-axis input | Coupling : DC Sensitivity: 5V or more Maximum input voltage : 30V (DC + AC peak) at 1kHz or less Bandwidth : DC ~ 5 MHz |
||||||||||||||||
VERTICAL SYSTEM | |||||||||||||||||
Sensitivity | 2mV~5V/div, 11 step in 1-2-5 sequence | ||||||||||||||||
Sensitivity Accuracy | ≦3% (5div at the center of display) | ||||||||||||||||
Vernier Vertical Sensitivity | Continuously variable to 1/2.5 or less of panel-indicate value | ||||||||||||||||
Bandwidth(-3dB) | DC~100MHz (2mV/div:DC~20MHz) | ||||||||||||||||
Rise Time | 3.5ns (2mV/div:17.5ns) | ||||||||||||||||
Signal Delay | Leading edge can be monitored | ||||||||||||||||
Max. Input Voltage | 400V(DC+AC peak) at 1kHz or less | ||||||||||||||||
Input Coupling | AC, DC, GND | ||||||||||||||||
Input Impedance | 1MΩ±2% // approx. 25pF | ||||||||||||||||
Vertical Mode | CH1,CH2,DUAL(CHOP/ALT), ADD, CH2 INV. | ||||||||||||||||
Bandwidth Limited | 20MHz | ||||||||||||||||
Common-Mode Rejection Ratio | 50:1 or better at 50kHz | ||||||||||||||||
Dynamic Range | 8 div at 60MHz 5 div at 100MHz |
||||||||||||||||
HORIZONTAL SYSTEM | |||||||||||||||||
Horizontal Modes | MAIN(A), ALT, DELAY(B) | ||||||||||||||||
A(main) Sweep Time | 50ns~0.5s/div, continuously variable (UNCAL) | ||||||||||||||||
B(delay) Sweep Time | 50ns~50ms/div | ||||||||||||||||
Accuracy | ±3% (±5% at x 10 MAG) | ||||||||||||||||
Sweep Magnification | x 10 (maximum sweep time 5nS/div) | ||||||||||||||||
Hold Off Time | Variable | ||||||||||||||||
Delay Time | 1μs~5s | ||||||||||||||||
Delay Jitter | Better than 1:20000 | ||||||||||||||||
Alternate Separation | Variable | ||||||||||||||||
TRIGGER | |||||||||||||||||
Trigger Modes | AUTO, NORM,TV | ||||||||||||||||
Trigger Source | CH1, CH2, LINE, EXT | ||||||||||||||||
Trigger Coupling | AC, DC, HFR, LFR | ||||||||||||||||
Trigger Slope | "+" or "-" polarity or TVsync polarity | ||||||||||||||||
Trigger Sensitivity |
|
||||||||||||||||
TV sync | TV-V, TV-H | ||||||||||||||||
Max. External Input Voltage | 400V (DC+AC peak) at 1kHz | ||||||||||||||||
External Input Impedance | 1MΩ±5% // approx.25pF | ||||||||||||||||
X-Y OPERATION | |||||||||||||||||
Mode |
X-axis: selectable CH1, CH2, EXT |
||||||||||||||||
Sensitivity Accuracy | 2mV~5V/div±3% ; EXT : 0.1V/div±5% | ||||||||||||||||
X-axis Bandwidth | DC~500kHz(-3dB) | ||||||||||||||||
Phase Error | 3° or less from DC~50kHz | ||||||||||||||||
OUTPUT SIGNAL | |||||||||||||||||
CH1 Signal Output | Voltage: approx. 25mV/div into 50Ω Frequency response : DC ~ 10MHz |
||||||||||||||||
Calibrator Output | 1kHz Square wave, 2Vpp±2% | ||||||||||||||||
CURSOR READOUT FUNCTION | |||||||||||||||||
Cursor Measurement Function | ΔV, ΔV%, ΔVdB, ΔT, 1/ ΔT, ΔT%, Δθ | ||||||||||||||||
Cursor Resolution | 1/100 DIV | ||||||||||||||||
Effective Cursor Range | Vertical: ±3div ; Horizontal: ±4 div | ||||||||||||||||
Panel Setting Display | Vertical: V/div(CH1,CH2),UNCAL,ALT/CHOP/ADD,INV, probe factor,AC/DC/GND Horizontal: s/div(MTB, DTB), UNCAL, x 10MAG, delay time , HO Trigger: source, coupling, slope, level, TV-V, TV-H Others: X-Y lock, save/recall MEM 0-9 (GOS-6103/GOS-6103C) |
||||||||||||||||
AUTO MEASUREMENT FUNCTION (GOS-6103C) | |||||||||||||||||
Parameter Function | FREQ, PERIOD, ±WIDTH, ±DUTY (+ or - polarity selected by trigger slope) | ||||||||||||||||
Display Digits | Max. 6-digits, decimal | ||||||||||||||||
Frequency Range | 50Hz ~ 100MHz | ||||||||||||||||
Accuracy | 1kHz ~ 100MHz : 0.01% ; 50Hz ~ 1kHz : 0.05% | ||||||||||||||||
Measuring Sensitivity | > 2 div (Measuring source selected from CH1 and CH2 as synchronous signal sources) | ||||||||||||||||
SPECIAL FUNCTION | |||||||||||||||||
TIME/DIV Auto Range | Provided (GOS-6103/GOS-6103C) | ||||||||||||||||
Panel Setting Save & Recall | 10 sets (GOS-6103/GOS-6103C) | ||||||||||||||||
Panel Setups Lock | Provided | ||||||||||||||||
POWER SOURCE | |||||||||||||||||
AC 100V/ 120V/ 230V±10% , 50/60Hz | |||||||||||||||||
DIMENSIONS & WEIGHT | |||||||||||||||||
310(W) x 150(H) x 455(D) mm; Approx. 9kg |
Accessories:
User manual x 1, Power cord x 1
GTP-100A-2: 100MHz (10:1/1:1) Switchable Passive Probe (one per channel)
Optional Accessories
GTL-110 Test lead, BNC-BNC heads
GTC-001 Instrument cart, 450(W) x 430(D)mm (120V input socket)
GTC-002 Instrument cart, 330(W) x 430(D)mm (120V input socket)
Ordering Information:
GOS-6112 100MHz, 2-channel, Analog Oscilloscope
GOS-6103 100MHz, 2-channel, Analog Oscilloscope
GOS-6103C 100MHz, 2-channel, Analog Oscilloscope with 100MHz Frequency Counter